How To Clean Underside Of Camper Awning- Step By Step Guide

The underside of the awning is more vulnerable to the risks of dirt and soiling. That is because it is the one which is mostly in direct contact with the soil and ground. You definitely have to know how to clean it to guarantee that it shall be in the proper working conditions all the time. Read on to find out how.

Tools and Materials Required

• White vinegar/baking soda

• Spray bottle

• Soft scrub brush/dish-washing scrubbing sponge

• Pail

• Old rags

• Safety goggles

Step-by-step Procedures

Step I: Prepare the awning

Prepare the awning for the subsequent task of cleaning it. Do this by rolling it out and the setting it up appropriately. To be assured of the best outcomes, you are advised to follow and adhere strictly to the manufacturer’s manual. You should also be slow and meticulous to avoid inflicting any damages onto your structure.

Step II: Prepare the cleaning solution

Prepare a solution for use to clean the awning. This solution ought to be non-toxic and mold-killing in nature. Pour the solution into a spray bottle. Some of the solutions to think of are the undiluted white vinegar. Alternatively, you might also mix a one-quarter tablespoon of baking soda with 24 ounces of water. Pour this solution into the spray bottle.

Step III: Apply the coating to the awning’s underside

Apply some generous amounts of the coating of the mold killer to your awning’s underside using the spray bottle. Impact those parts which do not contain any molds too. You definitely want to be proactive and suppress the future growth of spores and molds. Let the coating sit there undisturbed for around three to five minutes.

Step IV: Scrub the underside’s awning

After the coating has steeped into the fabric completely, proceed to scrub the underside. This is to eliminate any stubborn stains which might have hardened into the inner layers of the fabric. Use a dish-washing sponge or soft scrub brush to do this job. Dip the awning periodically in the pail of soapy water for better outcomes, view this article.

Step V: Rinse the underside of the awning

Now proceed to rinse the underside of the awning. You should preferably use a hose as it ejects some strong stream of water to do this. Toss some pails of very clean water on the awning. Thereafter, proceed to scrub it down using some clean rags and water.

Step VI: Allow drying

As the last step, leave the awning untouched for around 6 to 8 hours to let it dry. Be sure it is completely dry before retracting it. Look out for any residual molds or stains before storing it. You might have to repeat a couple of the above steps to rectify any such errors.

CONCLUSION

Now that you know how to clean the underside of your awning, why don’t you now go ahead to do a good job? The maintenance of your awning is paramount. You cannot afford to gamble at all with it. Best of luck as you set out to do the job later on!